80W / 100W CO2 Laser Engraving Cutting Machine
This series, use mid- power co2 laser, with 80w or 100w, fits in mid-sized laser machine, can be used for both cutting and engraving. Such machine not only has good performance in engraving, at the same time, can meet requirements of all kinds of nonmetal cutting works.
Product features:
1.High Speed Laser Engraving Machine & Laser Cutting Machine adopts new high-efficiency laser tube, the laser beam is more stable than the traditional type, and the life time of the laser tube can be over 10000 hours.
2. More scientific design and high-strength steel-frame structure , which increase the fuselage strength more than 40% to prevent the machine from distortion during long term work.
3. The humanized and modern appearance shows DWIN’s consistent humanity idea, and it also makes the operation and maintenance quite easy.
4. Advanced Leetro6585 control system and laser cutter 5.3 software can help laser machine works very well.
5.With red light positioning device accurately indicates the location of the processing of the laser head, eliminate the trouble about manual positioning.
Guarantee & After sales service:
1. 18 months quality guarantee for the main parts of the machine, excluding consuming parts, and the main parts shall be changed free of charge during the warranty time
2. Lifelong maintenance for the machine, and lifelong technical support from sophisticated English-speaking engineer team.
3. Free training course at our plant
4. We will provide the machine consuming parts with factory price when you need replacement.
5. 24 hours online service each day, free technical support.
Parameter
Model |
DW1290 |
Working area |
1200*900mm |
Laser power |
40W/60W/80W |
Laser type |
CO2 laser tube, water-cooling |
Engraving speed |
0-60000mm/min |
Cutting speed |
0-10000mm/min |
Power supply |
220V/50HZ , 110V/60HZ |
Position accuracy |
0.01mm |
Repetition accuracy |
0.02mm |
Graphic format supported |
BMP, PLT, DST, DXF, AI |
Guide rail |
Hiwin from Taiwan |
Transmission method |
Belt transmission |
Software supported |
CorelDraw, PhotoShop, AutoCAD, TAJIMA |
Driving system |
Leadshine driving system and stepper motor |
Net Weight |
350KGS |
Optional part |
Partial up-down work table, Rotary, Autofocus |
http://www.dwin-cnc.com/